Civil research · Research insights
A laboratory dam model shows how drain placement changes uplift
A physical seepage analogue explores how drainage position changes uplift. Learn why a dam's foundation water pressure matters as much as its visible mass.
A gravity dam relies heavily on its weight, but water beneath the base can reduce the effective force holding it down. Drainage is therefore part of the stability problem. The location of a drainage gallery influences how water moves through the foundation and how uplift pressure is distributed.
Latest breakthrough
An August 2026 Scientific Reports study uses a Hele-Shaw laboratory model to investigate drainage-gallery position beneath a concrete gravity dam. The experiment assumes steady seepage through a simplified homogeneous, isotropic foundation. Different horizontal positions and depths are compared, with nearly 70% uplift reduction reported for the study's best configuration. That figure belongs to the physical analogue and its stated reference conditions. The result is useful evidence about placement sensitivity, not a universal gallery location that can be copied into another dam.
Salem and colleagues. Scientific Reports (2026). Read the original study.
How the method works
A Hele-Shaw model represents flow through a thin gap and can provide an experimental analogue for selected seepage behaviour. The researchers varied drainage-gallery position and depth under steady-flow conditions in a simplified foundation. Uplift concerns water pressure acting beneath the dam; reducing it changes one part of the force balance. Comparing configurations within the same analogue helps isolate placement effects. Scaling from that controlled setting to an actual foundation requires attention to geology, fractures, boundaries and changing water levels that the simplified experiment does not reproduce.
A simple analogy
A drain's location can determine which region of a wet surface loses pressure most effectively. Moving it is not equivalent to simply making it larger. The analogy helps explain why placement matters, but a dam foundation is neither a household floor nor a uniform slab. Its real flow paths and structural consequences require site-specific assessment.
Water below the base changes the force balance
The reservoir is visible, while much of the seepage path is hidden inside or beneath the structure. Pressure along that path contributes an upward force. Drainage can intercept some of the flow and alter that pressure distribution. A change in total uplift also changes how the dam's own weight contributes to resisting other forces.
Why an analogue experiment is informative
Our interpretation is that a carefully controlled physical analogue helps separate the influence of geometry from other site complications. It can reveal trends that an engineer can then examine with more detailed models. The potential public benefit lies in better-founded assessment of water infrastructure. Any claimed safety improvement still requires evidence for the actual foundation and the condition of its drainage system.
A real foundation has additional complexity
Rock joints, anisotropy, changing reservoir levels and blocked drains can produce conditions outside the experiment. The study also uses an analogue of seepage rather than a full-scale dam. Its optimum should therefore be treated as a result within a defined parameter space. Monitoring and site-specific hydraulic and structural analysis remain necessary for a real asset. Water can also change the supporting ground, an interaction examined in the coupled scour and pile-foundation experiment.
Look inside the dam section
Use the gallery cutaway to locate the reservoir, broad gravity section, foundation and inspection gallery. Consider how an internal access space relates to the less visible drainage problem. The model shows the overall arrangement; its gallery is illustrative and is not the experiment's optimised drainage layout. It does not calculate uplift pressure or certify a dam design.
Related articles
A water-tank study captures scour and pile movement together
A seismic model brings soil continuity into retaining-wall analysis
What happens when a self-centering frame loses a steel strand?
Shape-memory metal closes cracks in experimental concrete beams
A damaged bridge truss reveals how forces find another route