Power electronics · Research insights
Nanoscale spin rectifiers turn weak radio signals into useful power
Magnetic tunnel junctions harvest weak radiofrequency energy in a Nature Electronics demonstration, with a sensor powered at a reported −27 dBm input.
Study published: 24 July 2024 · Nature Electronics. Original research commentary by NPT Research.
Wireless signals carry energy, but much of what reaches a small receiver is extremely weak. Collecting it requires more than adding an antenna: the rectifier must produce useful direct current while consuming very little of the energy it is trying to recover.
Latest breakthrough
The study demonstrated a sensitive spin-rectifier rectenna and an on-chip array based on magnetic tunnel junctions. The array reached a reported conversion efficiency of 7.81%, and the researchers demonstrated wireless sensor operation at a radiofrequency input of −27 dBm. The quoted results refer to the study’s operating conditions.
Read the original study: Nanoscale spin rectifiers for harvesting ambient radiofrequency energy.
How the study worked
The devices combine magnetic dynamics with electrical rectification. The team engineered the rectifier and coplanar-waveguide array, examined their sensitivity and efficiency, and linked the improvement to self-parametric excitation driven by voltage-controlled magnetic anisotropy. A sensor demonstration tested whether the output could support an actual small load.
The idea in everyday terms
Imagine a swing that can respond to carefully timed, gentle pushes. Here the relevant oscillation is magnetic, and the electrical signal interacts with that motion to produce a steady component. The analogy explains sensitivity to dynamics, not the creation of energy: the available output remains limited by incoming radio power.
Why it matters
For very low-power sensors, harvesting existing signals could reduce dependence on small batteries. The challenge is useful output under realistic signal strengths, antenna sizes and duty cycles. Broadband Hall rectification explores another way around limitations of ordinary junction devices.
What the evidence does not establish
A laboratory sensor result does not mean arbitrary devices can run indefinitely from ambient Wi-Fi. Available energy varies by location, frequency and distance. Matching networks and power-management losses also matter. The reported efficiency should not be applied to every input power or frequency.
Explore the device
The bridge-rectifier model introduces the general task of extracting a one-directional output from an alternating input. This paper changes the device physics rather than simply shrinking the four visible diodes. Superconducting bridge circuits provide a useful comparison at the opposite extreme of operating conditions.
Explore the Full-wave bridge rectifier model and its description, or read our earlier device-focused research explanation.
Primary citation: Raghav Sharma, Tung Ngo, Eleonora Raimondo et al.. Nanoscale spin rectifiers for harvesting ambient radiofrequency energy. Nature Electronics (2024). 10.1038/s41928-024-01212-1.
Related articles
A superconducting chip brings full-wave rectification into the cold
Tin telluride rectifies signals from megahertz to terahertz without external bias
A quantum material rectifies signals from radio to terahertz bands
Boron arsenide draws heat from working GaN transistors
Complementary GaN logic puts both transistor types on one substrate
A vibrating resonator helps a DC converter step down voltage efficiently
Built-in crystal polarization helps GaN switches withstand higher voltage
Elemental tellurium turns radio signals into a tunable room-temperature output
A 100 kW solid-state transformer reaches 98.57% efficiency in testing
A magnetic composite tackles eddy-current and hysteresis losses together
Narrow magnetic domains help an iron-rich ribbon waste less energy
Magnetic-domain motion can send energy into the crystal lattice
Engineered interfaces let magnetic particles couple without the usual loss penalty
A rotating magnetic field steers crystallisation toward finer soft magnets
An alloy becomes mechanically strong while remaining magnetically soft
Tiny manufacturing deformations can disturb the magnetic structure of motor steel
Nanoprecipitates push ductile soft magnets toward two-gigapascal strength
A two-phase buck converter tackles the light-load efficiency problem
An electrically heated foam brings heat inside a catalyst bed
A redesigned magnetic path cuts opening time in a solenoid studyExplore the models
Sources and further reading
- Nanoscale spin rectifiers for harvesting ambient radiofrequency energy Published 24 Jul 2024