Fluid machinery · Research insights
A stretchable fibre becomes a pump that can be woven into clothing
Science reports fibre-shaped pumps with embedded helical electrodes, bringing the pressure source into wearable fluidic systems.
Study published: 31 March 2023 · Science. Original research commentary by NPT Research.
Clothing that changes temperature or gives physical feedback needs a way to move fluid. A bulky pump undermines the comfort and flexibility of the garment. Researchers addressed that mismatch by making the pressure source itself long, thin and stretchable.
Latest breakthrough
The team created fibre pumps with continuous helical electrodes inside elastomer tubing. Charge-injection electrohydrodynamics drives the fluid without a rotating impeller. Reported performance included 100 kPa pressure generation per metre and flow rates approaching 55 mL per minute, alongside demonstrations in wearable fluidic systems.
Read the original study: Fiber pumps for wearable fluidic systems.
How the study worked
The researchers fabricated the electrode-containing tubes and measured pressure and flow. They then incorporated the fibres into haptic, mechanically active and temperature-regulating textile demonstrations. These application tests examined whether a pump could become part of the fabric architecture rather than remain a separate rigid accessory.
The idea in everyday terms
Instead of placing one powerful pump at the start of a hose, imagine the hose doing useful work along its own length. Electrical forces act on charges in the liquid and transfer momentum to the fluid. This picture explains distributed pumping, but the liquid and electrical insulation must be compatible with the actual device.
Why it matters
The design changes where pumping can happen, potentially making fluidic wearables easier to package. It builds on the broader move toward stretchable electrohydrodynamic pumps. The benefit is architectural freedom, not the claim that a textile pump can replace a waterworks pump.
What the evidence does not establish
Pressure and flow depend on geometry, fluid and operating conditions; maximum values should not be assumed to occur together. Wearable products would also require electrical, mechanical and long-term use validation. The demonstrations establish a research platform rather than universal readiness for clothing sold to consumers.
Explore the device
The centrifugal-pump model provides a useful baseline: its impeller transfers mechanical energy to liquid. The fibre pump supplies energy through a different force mechanism. Compare it with a self-powered soft pump to separate the question of how fluid moves from the question of where the driving energy comes from.
Explore the Centrifugal pump model and its description, or read our earlier device-focused research explanation.
Primary citation: Michael Smith, Vito Cacucciolo, Herbert Shea. Fiber pumps for wearable fluidic systems. Science (2023). 10.1126/science.ade8654.
Related articles
A soft pump runs on energy collected by a triboelectric generator
A soft pump moves liquid without a rotating impeller
Physics-guided AI tracks pump cavitation as flow conditions change
An accordion-inspired pump recreates complex flow waveforms
A superalloy’s oxide layer becomes a lubricant at extreme temperatures
Hydrogen can damage hot turbine alloys through a hidden chemical reaction
Cooling channels built with the electronics remove heat closer to its source
Printed ceramic coatings reflect heat from curved metal surfaces
A liquid-metal cooling elastomer changes shape to improve thermal contact
A structured water film suppresses boiling bubbles while cooling hot airflow
Heat drives a shape-memory cooling cycle in a small prototype
X-rays catch crystals turning while a turbine alloy is laser-remelted
Dense liquid-metal coils combine soft actuation, sensing and communication
A DNA clutch lets a magnetic nanomotor engage and disengage its rotor
Elastic electromagnetic mechanisms give small robots muscle-like motion
Electric current drives a molecular rotor and changes its conductance
An engineered environment changes a microscopic engine’s power–efficiency trade-off
Nanotextured surfaces help graphite maintain an extremely low-friction contact
Projected light assembles and drives reconfigurable microscopic machines
Liquid-metal networks turn a flat elastomer into programmable 3D surfaces
Magnetic measurements expose early fatigue changes in tested metals
Microscopy reveals which internal features hold a permanent magnet’s direction
Light drives microscopic gear trains through patterned metasurfaces
Changing the character of noise shifts a microscopic engine’s best operating speed
A rotating magnetic field steers crystallisation toward finer soft magnets
Soft robots steer their shape by combining local electromagnetic vectors
Friction consolidates brittle magnetic powders in a single processing step
A soft robot arm stays bendable while transmitting continuous torque
An alloy becomes mechanically strong while remaining magnetically soft
Tiny manufacturing deformations can disturb the magnetic structure of motor steel
Nanoprecipitates push ductile soft magnets toward two-gigapascal strength
Switching between unstable modes can stabilise a mechanical oscillator
Printed lattices strengthen turbine cooling in controlled rig tests
Changing a motor's magnetic geometry tackles a narrow noise peak
A pilot heat pump reuses distillation heat and reveals a trade-off
Matched motor tests connect higher efficiency with lower heat
A numerical design twists exchanger walls to improve heat transfer
A configurable joint reveals how small gaps turn motion into impactsExplore the models
Sources and further reading
- Fiber pumps for wearable fluidic systems Published 31 Mar 2023